Bmc Network Configuration - Supermicro SuperServer E200-9A User Manual

Table of Contents

Advertisement

Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No
to keep all system event logs after each system reboot. The options are No, Yes, On next
reset, and Yes, On every reset.
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event
log is full. The options are Do Nothing and Erase Immediately.
Note: After making changes on a setting, be sure to reboot the system for the changes
to take effect.
BMC Network Configuration
The following items will be displayed:
IPMI LAN Selection
This item displays the IPMI LAN setting. The default setting is Failover.
IPMI Network Link Status
This item displays the IPMI Network Link status. The default setting is Dedicated LAN.
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are No and Yes.
*If the item above is set to Yes, "Configuration Address Source" and "VLAN" will
become available for configuration:
Configuration Address Source
Use this item to select the source of the IP address for this computer. If Static is selected,
you will need to know the IP address of this computer and enter it to the system manually in
the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Configuration
Protocol) server in the network that is attached to and request the next available IP address
for this computer. The options are DHCP and Static.
The following items are assigned IP addresses automatically if DHCP is selected, or they
can be configured manually if Static is selected.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and
in dotted quad form (i.e., 192.168.10.253).
71
Chapter 5: BIOS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 5029a-2tn4

Table of Contents