Chassis Intrusion - Supermicro SuperServer E200-9A User Manual

TPM Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM), which is available
from Supermicro or a third-party vendor. A TPM is a security device that supports encryption
and authentication in hard drives. It enables the motherboard to deny access if the TPM
associated with the hard drive is not installed in the system.
More information on TPM is available at:
Trusted Platform Module Header
Pin Definitions
Pin# Definition
1 LCLK
3 LFRAME#
5 LRESET#
7 LAD3
9 3.3V
11 LAD0
13 SMB_CLK4 (X)
15 P3V3_STBY
17 GND
19 P3V3_STBY
Disk-On-Module Power Connector
The Disk-On-Module (DOM) power connector at JSD1 provides 5V power to a solid-state
DOM storage device connected to one of the SATA ports.

Chassis Intrusion

A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to the header to inform you when the chassis is opened.
http://www.supermicro.com/manuals/other/TPM.pdf
Pin# Definition
2 GND
4 No Pin
6 +5V (X)
8 LAD2
10 LAD1
12 GND
14 SMB_DAT4 (X)
16 SERIRQ
18 GND
20 LDRQ# (X)
DOM Power
Pin Definitions
Pin# Definition
1 5V
2 Ground
3 Ground
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
29
Chapter 3 Motherboard Connections
1
2
19
20