Pride Mobility Power Lift Recliner Series Owner's Manual page 18

POWER LIFT RECLINER SERIES
INFINITE POSITION HAND CONTROL OPERATION
Infi nite Position Hand Control - Style A
Follow these steps to sit in your power lift recliner
(Fig. 5.3):
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the UP po-
sition to raise your power lift recliner from the seated
position to the standing position.
3. Back into the power lift recliner and sit in the centre of
the seat, using the armrests for support if needed.
4. Engage and hold the up/down switch in the DOWN
position to lower the power lift recliner to a comfort-
able seated position.
Follow these steps to recline your power lift recliner
from the seated position (Fig. 5.3):
1. Slide the inhibit switch to the right.
2. Engage and hold the up/down switch in the DOWN
position until comfortably reclined.
3. Engage and hold the up/down switch in the UP posi-
tion to return to an upright, seated position. Release
the switch when the power lift recliner reaches a
comfortable seated position.
Follow these steps to raise or lower the footrest while in the seated or reclined position (Fig. 5.3):
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the DOWN position until the footrest is fully elevated.
3. Engage and hold the up/down switch in the UP position to lower the footrest.
Follow these steps to stand up from your power lift recliner from the seated position (Fig. 5.3):
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the UP position to raise your power lift recliner.
3. Release the switch when the power lift recliner reaches a height where you can stand up comfortably.
WARNING! Do not attempt to stand
up until you can stand safely, are
steady on your feet and can bear
weight. Pride recommends the use of
assistance aids and/or an attendant
for enhanced stability.
WARNING! Avoid putting all of your
weight on the lift chair armrests
when attempting to stand and do not
use the armrests for weight bearing
purposes.
Infi nite Position Hand Control Operation - Style B
Follow these steps to sit in your power lift recliner
(Fig. 5.4):
1. Press and hold the STAND button to raise your power
lift recliner to the standing position.
2. Back into the power lift recliner and sit in the centre of
the seat, using the armrests for support if needed.
3. Press and hold the SIT button to lower the power lift
recliner to a comfortable seated position.
18
KEYLOCK
DOWN POSITION
LIFT POSITION
INHIBIT SWITCH
Figure 5.2 Infi nite Position Hand Control - Style A
KEYLOCK
RECLINE BUTTON
FOOTREST UP
BUTTON
SIT BUTTON
Figure 5.4 Infi nite Position Hand Control - Style B
www.pride-mobility.co.uk
V. OPERATION
UP POSITION
RECLINE POSITION
POWER LED
INCLINE BUTTON
FOOTREST DOWN
BUTTON
STAND BUTTON
Power Lift Recliner Series