Fc-Al Interface Cards - IBM StorageSmart DF1100R Operator's Manual

HOST FC Status light 4
OUT FC Status light 5
Card Fault light 6

FC-AL Interface Cards

Two FC-AL interface 1 cards are installed in the back of a ProFibre Storage Array
Expansion Unit.
Figure 8. FC-AL Interface Card Assemblies
An FC-AL interface card has the following lights:
Figure 9. FC-AL Interface Card Assembly Lights
Status lights 1
8
ProFibre Storage Array: Operator's Guide
This Status light, which is amber, is lit when there is no valid Fibre
Channel connection through the HOST port, or when the port is inactive
while it is waiting for failover.
This Status light, which is amber, is lit when there is no valid Fibre
Channel connection through the OUT port, or when the port is inactive
while it is waiting for failover.
The Card Fault light, which is amber, is lit when there is a fault on the
RAID FF card or during boot up of the RAID FF card.
There are two amber Status lights. The one on the left is lit when there is
no active Fibre Channel connection to the IN port. The one on the right is
lit when there is no active Fibre Channel connection to the OUT port.