Advertisement
02
LEFT-SIDE STEERING WHEEL LEVER
Headlight functions are controlled using the left-side steering wheel
lever.
If you select AUTO mode, the vehicle will automatically monitor lighting
conditions and adjust headlight illumination accordingly, e.g. switch
from daytime running lights to low beam when the sun goes down or
when you drive into a tunnel. You can also turn the lighting ring on the
lever to
to switch on the Active High Beam function, which automat-
ically dims the headlights for approaching vehicles. Move the steering
wheel lever forward to manually activate high beams. Move the lever
rearward to switch back to low beams.
Active Bending Lights* are designed to follow the movement of the
steering wheel to help provide maximum illumination in turns and inter-
sections. The function is automatically activated when the engine is
started and can be deactivated in the center display's function view.
Approach lighting is activated when you unlock the vehicle using the
key and provides illumination to help you approach the vehicle safely in
the dark.
Home Safe Lighting illuminates some of the exterior lights after the
vehicle is locked to provide illumination around the vehicle in dark con-
ditions. To activate the function, switch off the ignition and move the
left-side steering wheel lever toward the dashboard and release. The
length of time home safe lighting remains illuminated can be set in the
center display.
Resetting the trip odometers
Reset all information in the manual trip odometer (TM) by pressing and
holding the RESET button. Press the button briefly to reset only the
mileage. The automatic trip odometer (TA) resets automatically when
the vehicle is switched off for more than 4 hours.
Advertisement
