F-02A_E1kou
L03.fm Page 47 Thursday, November 27, 2008 9:48 AM
◆ Operations to perform after turning the power ON at the
first time
When turning the power ON for the first time, operate in the order of
"AdvancedMode setting"→"Initial setting". The settings made can be changed later.
・
When initialization is finished, a confirmation screen of software update function
appears. Press g to display the stand-by screen.
❖
AdvancedMode setting
1
"Yes" or "No" on the confirmation screen
・
When selecting "Yes", "拡大メニュー (AdvancedMode)" of Kisekae Tool is set.
If you cancel the confirmation screen by pressing c or f, the
confirmation screen reappears when the power is turned ON the next time.
❖
Default setting
Password must be set. When C, c or f is pressed before setting a
・
password, a confirmation screen to exit appears. If you exit by selecting "Yes", the
initial setting screen reappears when the power is turned ON next time.
・
The initial setting screen is also displayed by pressing m [Settings & NW
services] 759 on the stand-by display.
1
Set required items on Initial setting screeneC
Date & time : Set the date and time.→P48
Password : Change the terminal security code after performing authentication.
→P101
Keypad sound : Set a confirmation sound emitted when a key is pressed.→P83
Text size : Set size of characters for phonebook, mail, etc.→P97
❖
Checking Welcome mail
"オススメ (Recommended)
BEST
(Early warning "Area Mail" information)", "Welcome
Anime)
" mail are saved by default. ● appears on the stand-by display, and
when FOMA terminal is folded, the light (blinking) and mail light indicate that
unread mail exists.
1
geg
The next procedures→P135 Step 2 and the following steps in "Displaying mail
in Inbox/Outbox"
", "緊急速報「エリアメール」のご案内
デコメアニメ (Decome-
✔INFORMATION
・
When UIM is replaced, authentication is required after turning ON FOMA terminal.
When authentication succeeds, the stand-by display appears. If an incorrect terminal
security code is entered 5 times consecutively, the power is turned OFF (it can be turned
ON again).
・
If no operation is performed with something displayed on the screen, the display light
is turned off automatically according to the settings in Power saving mode. It also
applies while making a call. The display light turns on again if there is any operation or
incoming call.
47
Before Using the Handset