Quick Internet Setup; Getting Prepared; Hardware Install - Tenda FH1202 User Manual

1 Getting Prepared

Before you start the installation process, you need to prepare the following:
Item
Router
Power Adapter
PC
Ethernet Cable
Ethernet Cable
from the incoming
Internet side
Gather ISP
Information

2 Hardware Install

------------------------------------------------------------
Note
Before you start, make sure you can access Internet by connecting the cable from
the incoming Internet side to your PC.
--------------------------------------------------------------------
II Quick Internet Setup
Description
Find it in your package
Please use the power adapter that comes in the package.
Using a power adapter with a differ ent voltage rating than
the one included with the router will cause damage to the
router.
Should have a installed IE8 or higher browser
You will need it to connect your PC to the router
This is provided by your ISP
Your Internet service provider (ISP) should have provided
you with all of the information needed to connect to the
Internet.If you cannot locate this information, ask your
ISP to provide it.

If your ISP uses a PPPoE Internet connection, you
will need ISP login name and password.

If you use a DHCP Internet connection, no
information is needed.

If your ISP gives you a fixed or static IP address
for Internet connection, you will need to gather the
following information:
1) IP Address
2) Subnet Mask
3) Gateway
4) DNS Server
5) Alternate DNS Server (Optional)
5