MAINTENANCE
Item
Position
A
Table Opening
B
Connection Plate
C
Main Shaft
Apply a drop of light machine oil occasionally on the
ledge and wall of the table opening to facilitate the
changing of table inserts.
The bearings in the motor are sealed for life and do
not require lubrication.
The main shaft should be lubricated with grease regu-
larly after continuous running for 30 days. See chart.
FIGURE 28
Interval
Suitable types of oil
Frequently
Frequently
Monthly
Shell Alvania Grease R2
FIGURE 27
Machine Oil
Machine Oil
Fig. No.
28
29
28
13