Installation Guidelines - Cisco AIR-OEAP602I-E-K9 User Manual

Aironet 600 series officeextend access point
Hide thumbs Also See for AIR-OEAP602I-E-K9:
Table of Contents

Advertisement

R E V I E W D R A F T — C I S C O C O N F I D E N T I A L

Installation Guidelines

To install the Cisco Aironet 600 Series OfficeExtend Access Point, follow these steps:
Step 1
Plug the Ethernet cable into the Ethernet port.
Step 2
Insert the other end of the Ethernet cable into an Ethernet port 1, 2, or 3 of your router.
Note
Plug the power cord into the power connector.
Step 3
Plug the power cord into your power source.
Step 4
Press the power toggle switch to the on position.
Step 5
DSL/Cable
Modem
Step 6
Use the 600 Series OfficeExtend Access Point LED table below
LED and the Ethernet LEDs located on the top panel of the access point.
Note
The first time you connect the 600 Series OfficeExtend Access Point, the process may take anywhere
between 2 and 15 minutes due to an image download. If more than 10 access points are joining, the
process could take as long as 60 minutes. When associated, your access point Status LED on the top
panel displays a solid blue.
You do not need to configure any SSIDs for your 600 Series OfficeExtend Access Point to connect to
Note
your company's network. The access point receives the company's SSID when it connects to the
company network by way of the Internet. If you have any problems connecting to your company's
network, contact your IT administrator.
You can configure your local SSID WLAN for other devices. See
Cisco Aironet 600 Series OfficeExtend Access
Be careful when handling the 600 Series OfficeExtend Access Point. The bottom may be HOT.
Caution
Tip
To manage the heat generated from the access point, maintain air flow between the metal plate of the
access point and the surface on which it is placed.
A laptop cooling pad (such as ones containing gel or cooling crystals) is a possible option for an access
point placed on a flat surface. Another option for managing the heat is to hang the access point on a wall.
Ethernet port 4 should not be used.
Router
Client
OfficeExtended
AP
(Table
Point" for more information.
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Installation Guidelines
1) to better understand the Status
"Configuring a Personal SSID on a
3

Advertisement

Table of Contents
loading

Table of Contents