Specifications - Midland 71-506-10D Operator's Manual

6.

SPECIFICATIONS

6.1 General
Frequency Range
Number of Channels
Channel Spacing
Operation Mode
Antenna Impedance
Power Supply
Consumption
Environmental Conditions
Dimensions
Weight
6.2 Transmitter
Output Power
Switchable Bandwidth
Frequency Deviation
Frequency Stability
Frequency Response
Signal to Noise Ratio
Modulation Distortion
Spurious & Harmonics
6.3 Receiver
Switchable Bandwidth
IF Frequencies
Frequency Stability
Sensitivity
Squelch Sensitivity
Selectivity
Blocking
Intermodulation
Spurious Response
AF Response
AF Distortion
Signal to Noise Ratio
71-506-10D FULL-DUPLEX MOBILE
Version SA 300 - 335MHz
Version A 335 - 370MHz
Version B 365 - 400MHz
Version C 400 - 435MHz
Version DS 420 - 455MHz
Version D 440 - 475MHz
Version E 465 - 500MHz
Version F 485 - 520MHz
64 channels (observe duplexer limitations)
12.5/20/25/30KHz
Semi Duplex/Full Duplex
50 ohm unbalanced
DC 13.6V negative ground only (external)
8 amperes or less
-30 to +60 degree C, 95% humidity @35C
220 (w) 82 (h) 347 (d) mm
6 kgs.
10W continuous, 13W maximum
Full sub-band
5KHz(wide band) 2.5KHz(narrow band)
+/- 1KHz
Within +1, -3dB, 300-3000Hz @1KHz ref.
50dB or more @1KHz 70% mod. (45dB at narrow)
3% or less
0.25uW or less
full sub-band
st nd
1 IF 73.35MHz, 2 IF 455KHz
+/- 1KHz
0.4uV or less for 20dB N.Q. / 0.3uV for 12dB SINAD
0.25uV or less
70dB or more at 25KHz
90dB or more
70dB or more
70dB or more
Within +1, -3dB, 300-3000Hz @1KHz ref.
5% or less @1KHz 70% mod
50dB or more @1KHz 70% mod. (45dB at narrow)
8