Pre-Installation - ASROCK H110 Pro BTC+ Installation Manual

Pre-installation:

1. Choose reliable PCIe riser kits with a USB connection and additional power input.
2. Always connect a power supply to the power connector of PCIe riser card.
3. If a secondary power supply is used, please use a dual power supply adapter in order to start up both
power supplies simultaneously.
a. Depending on the system configuration and type and number of graphics cards, we recommend
to have at least 2400W for 13 GPU mining.
b. We highly recommend NOT to turn on the power supply by shorting the specific wire on the 24-
pin ATX cable.
Please refer to the below picture for power connections (not including the required connections to
the PCIe riser cards).
Page 2