Component Storage - Dell S4248FB-ON Installation Manual

Component storage

If you do not install your S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch and components immediately, properly store the
switch and all optional components by following these guidelines:
• Storage location temperature must remain constant. The storage range is from -40°C to 70°C (-40°F to 158°F).
• Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.
• Store in a dust-free environment.
NOTE: ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the S4200-ON Series switch and its accessories. After you remove the original packaging, place the S4200-ON
Series switch and its components on an anti-static surface.
Site preparations 15