Overview
Overview
This chapter explains the sequence of events that occurs as soon as you select a profile that uses EAP
authentication as well as after you eject and reinsert the client adapter, reset the Windows CE device, or
are informed that your username and password have expired. The chapter contains three sections based
on the profile's authentication type:
•
•
•
Follow the instructions for your profile's authentication type to successfully authenticate.
If any error messages appear during authentication, refer to
Note
recommended actions.
Using LEAP
With a Temporary Username and Password
After you select a profile that uses LEAP authentication (with a temporary username and password) or
you eject and reinsert the client adapter or reset your Windows CE device while this profile is selected,
follow the steps below to LEAP authenticate.
Step 1
The Wireless Login Module screen appears (see
Figure 6-1
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
6-2
Using LEAP, see below
Using EAP-TLS,
page 6-4
Using PEAP,
page 6-6
Wireless Login Module Screen
Chapter 6
Chapter 9
for explanations and
Figure
6-1).
Using EAP Authentication
OL-1375-03