System Requirements - Cisco AIR-PCM341 Installation And Configuration Manual

System Requirements

System Requirements
In addition to the items shipped with the client adapter, you will also need the following in order to install
and use the adapter:
•
•
•
•
•
•
•
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
2-4
One of the following Windows CE devices equipped with a Type II or Type III PC card slot:
– Pocket PC (PPC) running Windows CE 3.0 with an ARM, StrongARM, MIPS, SH3, or X86
processor
Handheld PC (HPC) running Windows CE 3.0 with an ARM, StrongARM, MIPS, SH4, or X86
–
processor
– A computing device running Windows CE .NET 4.0 or 4.1 with an ARM, StrongARM, or X86
processor
ViewSonic devices running Windows CE .NET are not supported.
Note
All drivers and supporting software (Card and Socket Services) for the PC card slot must be
Note
loaded and configured.
Laptop or PC with a CD-ROM drive and running a Windows operating system and ActiveSync
Serial or USB connection to the Windows CE device
A PPC 2002 device, if your wireless network uses EAP-TLS or PEAP authentication
Certificate Authority (CA) and user certificates for EAP-TLS authentication or CA certificate for
PEAP authentication
If your wireless network uses PEAP authentication with a One-Time Password (OTP) user database:
– The hardware token from an OTP vendor
– Your hardware token password
The following information from your system administrator:
– The logical name for your Windows CE device (also referred to as client name)
The case-sensitive service set identifier (SSID) for your RF network
–
The primary and secondary Domain Name System (DNS) and Windows Internet Name Service
–
(WINS) to be assigned to your Windows CE device
If your Windows CE device is not connected to a DHCP server, the IP address, subnet mask,
–
and default gateway address to be assigned to your device
The wired equivalent privacy (WEP) keys of the access points with which your client adapter
–
will communicate, if your wireless network uses static WEP for security
Your username and password for LEAP or PEAP authentication, if your wireless network uses
–
one of these authentication types
Your username for EAP-TLS authentication, if your wireless network uses EAP-TLS
–
authentication
Chapter 2 Preparing for Installation
OL-1375-03