Turn Main Switch To “On” Position - KYMCO SPADE 150i Owner's Manual

Turn Main Switch to "ON" position
4

Check if Neutral Indicator lights up when turning the
key into ON position; check also if Horn and Direction
Lights work normally.
CAUTION
Starting the Engine
● When starting the engine with the electrical motor, do
not turn the Throttle Grip; pull the clutch tight and
push the starting button, engine will now be started.
<Note> For starting difficulties with a cold engine or after
a long time without using the vehicle, key on for
2-4 seconds and key off, repeat the procedure
several times to warm up the fuel pump for
normal fuel supply.
CAUTION

Keep your finger off the Starting Button immediately
when the engine starts.

Do not press the Starting Button when engine is
running or the engine may be affected adversely. Never
use the Starting Button more than 4 seconds each time.
4-1