Kyocera FS-C5100DN Operation Manual page 34

>SSL Server
On
>>DES
Off
>>3DES
Off
>>AES
Off
>>IPP over SSL
Off
>>HTTPS
Off
>>DES
?Off
>IPSec
On
>IPSec
?On
2-8
SSL Server
1
This section explains the procedure for enabling SSL Server.
>
Enter the administrator ID and password. Then, if SSL Server is set
to Off, use
2
Press . Each time you press
3
Display the item you want to set and press [OK] ([ENTER]). A
blinking question mark (?) appears.
4
Select On or Off using
5
Press [OK] ([ENTER]).
6
Press [MENU]. The display returns to Ready.
IPSec
1
This section explains the procedure for enabling IPSec.
Enter the administrator ID and password. Then, if IPSec is set to
Off, use or
2
Press [OK] ([ENTER]). A blinking question mark (?) appears.
3
Press [OK] ([ENTER]) again.
4
Press [MENU]. The display returns to Ready.
or to select On and press [OK] ([ENTER]).
or , the selection changes.
or .
to select On.
Printing Operation