Kyocera FS-C5100DN Operation Manual page 28

Network
>TCP/IP
Off
>TCP/IP (IPv6) >
Off
2-2
Changing Network Interface Parameters
This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP,
SSL Server and IPSec protocols (For details see Advanced Operation
Guide.)
TCP/IP, TCP/IP (IPv6) settings
1
Press [MENU].
2
Press or
>
3
Press . Each time you press
to the explanations below when specifying the settings.
Set this item to On when you connect to a network using TCP/IP.
>
Submenu has items including DHCP, Bonjour, IP Address,
Subnet Mask and Gateway.
Set this item to On when you connect to a network using TCP/IP
(IPv6). Submenu has items including ICMPv6(NDP), DHCPv6 and
Prefix Length.
repeatedly until Network > appears.
or , the selection changes. Refer
Printing Operation