Related Manuals for JLL T350
Summary of Contents for JLL T350
- Page 1 ® INSTRUCTION MANUAL Please read this book thoroughly before operating the treadmill.
-
Page 2: Table Of Contents
8 Content listing p. 9 Box contents p. 9 Accessories box p. 9 Tools pack p. 9 T350 assembly p. 10 Folding & unfolding the treadmill p. 12 Setup options p. 12 Monitor configuration p. 13 Display information p. 13 LCD brightness adjustment p. - Page 3 Starting the treadmill p. 18 Stopping the treadmill p. 18 Emergency dismount p. 18 Safety key function p. 18 Heart-rate sensors p. 19 Data readouts p. 19 Entertainment p. 19 USB audio interface p. 19 Bluetooth audio instructions p. 20 Programs p.
-
Page 4: Safety Instructions
Safety Instructions Please pay attention to the following instructions before operating this treadmill. ELECTRICAL PREREQUISITES This treadmill must be earthed and plugged into an appropriate electrical outlet that is properly installed and earthed in accordance with all local codes and ordinances. This treadmill is for use on an earthed, dedicated circuit. -
Page 5: During Use
• Maximum user weight is 120kg/ 23.6 St. • Inspect unit. If damaged, DO NOT USE. • Ensure every bolt and screw is securely tightened. • Place your feet on the side frames when starting or stopping the treadmill. DURING USE •... -
Page 6: Safety Key
• DO NOT use the treadmill with 2 or more people running at the same time. • Read the instruction manual completely before using the treadmill. • Ensure all users wear appropriate footwear on JLL equipment. ® • Set up and operate the treadmill on a level surface. DO NOT operate in small restricted areas or on plush carpet. -
Page 7: Warning Stickers
WARNING STICKERS Warning stickers indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury. Carefully read the following caution and warning labels before using the unit. WARNING 1. Do not leave the treadmill before ensuring the machine has been locked tightly and properly. -
Page 8: Assembly
Assembly PREPARING SITE To find the ideal location to set up this treadmill, ensure that: • Area is well illuminated and well ventilated. • Surface is level. • There is enough space to access the unit and emergency dismount. If it is possible, keep the following clearances: 0.5 m at each side and 2 m at the back. -
Page 9: Content Listing
CONTENT LISTING See diagram (left) and content listing (below) for treadmill box contents. See Customer Service chapter for contact information if any parts are missing. BOX CONTENTS Console Manual Treadmill Main Body Vertical Frame x2 Accessories Box Program Guide ACCESSORIES BOX Safety Key Power Cable Oil Bottle... -
Page 10: T350 Assembly
Inside the box you will find a Tools Pack (Hex Allen Key, Screwdriver, Washers and Bolts). See previous page. To assemble your JLL T350 please follow these easy steps: STEP 1... - Page 11 STEP 5 Screw the console to the vertical frame bar. Use 2x black Allen head bolts, 1x black arc washer and 1x black flat washer for each side. STEP 6 To level the treadmill, adjust the rubber feet at the base if required.
-
Page 12: Folding & Unfolding The Treadmill
FOLDING & UNFOLDING THE TREADMILL To fold: Hold the end of the running deck by the side frames/rails and lift it until the machine gets to an upright position and you hear a click from the hydraulic cylinder. To unfold: Press the hydraulic cylinder with your foot. -
Page 13: Monitor Configuration
MONITOR CONFIGURATION LCD display Bluetooth status LED USB port Selected programs overview DISPLAY INFORMATION 00 00 0000 Weight Total Time Total Distance min:sec Pulse signal 0 0 0 T / min Heart-rate CALORIE Calories Speed km/h Incline Level The Weight and Total Distance are shown in the same area of the display. When holding the handrails a flashing dot will appear on the Pulse signal section on the display and the Calories reading will change and display your Heart-rate (T/min). -
Page 14: Lcd Brightness Adjustment
LCD BRIGHTNESS ADJUSTMENT 1. In STANDBY mode, press and hold the PAUSE/STOP button for 5-8 seconds. The incline section will display the brightness level (from 7 to 20). 2. Adjust the brightness of the LCD display using the SPEED INCREASE or SPEED DECREASE buttons. -
Page 15: Specifications
SPECIFICATIONS Blue backlit 5” LCD Displays: Time, speed, distance, heart-rate, calories Display and incline. Programs 20 running programs. See Treadmill Program Guide included. Entertainment High Powered Speakers, USB interface & Bluetooth wireless connection. Storage Foldable and built-in wheels. Quick Buttons Quick Speed: 4, 8, 10 km/h. -
Page 16: Operation
Operation Read all instructions, warnings and safety procedures located in the Safety chapter before using the treadmill. CONTROL SYMBOLS USED Press to establish the setup parameters. During the middle of a workout press the button once to stop the running belt and pause the workout. This PAUSE/STOP will also display the workout review. -
Page 17: Setup
SETUP SETUP PARAMETERS The treadmill should be completely stopped before accessing the Setup options. 1. Press the SET button and all the numbers in the display area will become ZERO (0), except WEIGHT. 2. Press SET several times to change different settings and the number in the display area will flash. -
Page 18: Starting The Treadmill
STARTING THE TREADMILL Maximum user weight is up to 120 kg, 18.9 St or 265 lb. 1. Switch on the treadmill. 2. Set up your weight to estimate calories burned. 3. Place each of your feet on the side frames located on each side of the running belt. 4. -
Page 19: Heart-Rate Sensors
HEART-RATE SENSORS Hold the sensor plates on the handlebars ensuring that your hands are clean. A heart- rate reading will show on the display. Factors that interfere with pulse signal are: • Hand lotions, oils or body powder. • Excessive dirt. •... -
Page 20: Bluetooth Audio Instructions
BLUETOOTH AUDIO INSTRUCTIONS Turn on the Bluetooth on your device. 1. Click or tap on SEARCH DEVICE. 2. Select HUIKANG and your device should now be connected to the treadmill. 3. Wait for the treadmill console to beep to confirm the pairing. 4. -
Page 21: Maintenance
Read and understand all instructions and warnings listed both in this chapter and in the Safety chapter. During maintenance, disconnect the power cable. Contact JLL ® Customer Service on +44 (0)800 6123 988 for any maintenance or service concerns. -
Page 22: Treadmill Cleaning
Any rust will indicate there may be moisture in the air and as a result this could impact on the integrity and performance of your machine. WARNING 1. Use only JLL replacement parts. ® 2. Unplug unit and let sit 10 minutes before cleaning or performing maintenance. -
Page 23: Treadmill Balance
3 EASY STEPS TO CLEAN YOUR TREADMILL Recommendation (these are just a guideline): • Set the speed at 2 km/h and put a humid, clean cloth at the end of the running belt, hold it there and move it along the end of the running belt until it is free of dust. •... -
Page 24: How To Check If The Running Belt Is Loose
3. Look at the running board or touch it to check if it is oily or not. In case of dryness, use the lubrication oil provided and apply it on the running deck by spreading a straight line down the side of the deck. Ensure that the middle of the board is lubricated. -
Page 25: Adjusting The Belt When It's Not Centred (Bear Left Or Right)
3. Get back on the treadmill and check the belt (read description above). If it is still loose, re-adjust the belt screws by another quarter until you get the required tension on the belt. 4. Run the machine on its own for 1-2 minutes to see if the belt stays in the middle. -
Page 26: Tightening The Motor Belt
3. An easy way of checking is by touching the motor belt to feel if it is slack. If you can wiggle the belt up and down, it means that the drive belt is loose. 4. You can check this every time you use the treadmill by setting the speed to 2-3 km/h then walking on the machine and try to stop the running belt with your feet while holding the handrails and pulling your body in the opposite direction. -
Page 27: Additional Information
• Always seek professional advice before changing your diet or starting any exercise program. • JLL Fitness Ltd is not liable for any injuries or damages that may occur when assembling or using this treadmill. • Users must be cautious when using the top speeds on this treadmill. Although the machine has a top speed of 18 km/h, for safety reasons, JLL Fitness Ltd does not recommend exceeding 16 km/h. - Page 28 WWW.JLLFITNESS.CO.UK @JLLFitness Follow us on Facebook and Twitter © JLL Fitness Ltd . All Rights Reserved.