Brother HL-L2310D Online User's Manual page 242

Level 1 Level 2
WLAN TCP/IP
Setup Wizard
WLAN Assistant -
WPS
WPS w/PIN Code -
WLAN Status
MAC Address
WLAN Enable
Wi-Fi Push Button
Direct
PIN Code
Manual
Group Owner
Device Info.
Status Info.
Level 3 Level 4
WINS Primary
Server
Secondary Specify the IP address of the secondary WINS
DNS Server Primary
Secondary Specify the IP address of the secondary DNS
APIPA -
IPv6 -
- -
-
- -
-
Status -
Signal -
Channel -
Speed -
SSID -
Comm. Mode -
- -
- -
- -
- -
- -
- -
Device -
Name
SSID -
IP Address -
Status -
Signal -
Channel -
Descriptions
Specify the IP address of the primary WINS
server.
server.
Specify the IP address of the primary DNS
server.
server.
Allocate the IP address from the link-local
address range automatically
Enable or disable the IPv6 protocol.
Configure the wireless network settings using the
setup wizard.
Configure your wireless network settings using
the Brother installation disc.
Configure your wireless network settings using
the one-button push method.
Configure the wireless network settings using
WPS with a PIN code.
Display the wireless Ethernet link status.
Display the signal condition.
Display the channel in use when Status is
Active.
Display the connection speed when Status is
Active.
Display SSID.
Display the current Communication mode.
Display the MAC address of the machine.
Turn the wireless interface on or off.
Configure your Wi-Fi Direct network settings
using the one-button push method quickly.
Configure your Wi-Fi Direct network settings
using WPS with a PIN code quickly.
Configure your Wi-Fi Direct network settings
manually.
Set your machine as the Group Owner.
View your machine's device name.
Display the Group Owner's SSID.
Display your machine's IP Address.
Display the Wi-Fi Direct network status.
Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always displays Strong.
Display the channel in use when the Status is
G/O Active or Client Active.
1
.
238