Brother HL-L2310D Online User's Manual page 241

Level 1
HP LaserJet
BR-Script 3
(Available only for certain
models)
All other models
Level 1
Test Print
2-sided
(For automatic 2-sided
printing models)
Auto Continue
Print Position
[Network] (HL-L2350DW/HL-L2351DW)
Level 1 Level 2
WLAN TCP/IP
Level 2 Description
Symbol Set Select the symbol or character set.
Table Print Print the code table.
Auto LF
ON: CR -> CR+LF, OFF: CR -> CR
Auto CR ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto WRAP Choose whether a line feed and carriage return will happen when the
machine reaches the right margin.
Auto SKIP Choose whether a line feed and carriage return will happen when the
carriage position reaches the bottom margin.
Left Margin Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin Set the top margin distance from the top edge of the paper.
Bottom Set the bottom margin distance from the bottom edge of the paper.
Margin
Lines Set the number of lines on each page.
Tray Command Select this setting if a tray mismatch appears when you use the HP
drivers.
Error Print Choose whether the machine prints the error information when errors
occur.
Level 2 Description
- Print a test page.
2-sided Turn 2-sided printing off or on and select flip on long edge or short edge.
Print
Single For a print job where the last page is a 1-sided image, select the 1-
Image
sided Feed option to reduce printing time.
- Select if you want the machine to clear paper size errors or media type
errors automatically.
X Offset Move the print start position (at the top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset
Move the print start position (at the top-left corner of pages) vertically up
to -500 (up) to +500 (down) dots in 300 dpi.
Level 3
Boot
Method
IP Address
Subnet
Mask
Gateway
Node Name
WINS
Config
Level 4 Descriptions
- Choose the IP method that best suits your
needs.
- Enter the IP address.
- Enter the Subnet mask.
- Enter the Gateway address.
- Enter the Node name.
- Select the WINS configuration mode.
237