Call Waiting - Cobra MRF77 Manual

Call Waiting functions similarly to the Caller ID function on your telephone. It will
capture the caller's MMSI identi cation number and any other data included in a DSC
message.
NOTE
Each Call Log memory can hold up to 20 messages. Once the memory becomes
full, each new call will erase the oldest call information on a rst-in, rst-out
basis.
NOTE
The Envelope Icon will be displayed when calls are received and placed into any
of the call logs.
The envelope Icon will be shown closed to indicate
unread messages.
The envelope Icon will be shown open to indicate that all
messages have been read.
To Review Call Log Messages Received
While In DSC Standby Mode:
1. Press the CALL soft key and scroll to
with the Up/Down soft keys or the channel Up/Down
buttons and press the ENTR soft key.
2. Using the Up/Down soft keys or the channel Up/Down
buttons to highlight DISTRESS LOG or RECEIVED CALLS
logs.
3. Press the ENTR key.
4. Using the Up/Down soft keys or the channel Up/Down
buttons to highlight a log entry.
5. Press the ENTR key to view the log entry.
6. Press the EXIT soft key to exit the Position Send mode
and return the radio to the DSC CALL LOGS Menu.
To Delete Call Log Information:
1. Press the CALL soft key and scroll to
with the Up/Down soft keys or the channel Up/Down
buttons and press the ENTR soft key.
2. Using the Up/Down soft keys or the channel Up/Down
buttons to highlight

CALL WAITING

CALL WAITING
.
DELETE CALL LOGS
To Delete Call Log Information continued:
3. Press the ENTR key.
4. Using the Up/Down soft keys or the channel Up/Down
buttons to highlight
log entry.
5. Press the ENTR key and con rm delete by pressing the
ENTR key.
6. Press the EXIT soft key to exit the Position Send mode
and return the radio to the
The Test Call feature allows the user to con rm that the radio is fully operational and
that the DSC call functions are working properly.
1. Press the CALL soft key and scroll to
the UP/Down soft keys or the channel Up/Down buttons
and press the ENTR soft key.
2. Using the Up/Down soft keys or the channel Up/Down
buttons to highlight a previously entered directory entry
or use the MANUAL entry option.
3. Press the ENTR key.
4. Press the ENTR soft key to send the Test Call.
5. The radio will tune to the voice channel previously selected.
6. Press the EXIT soft key to exit the Test Call mode and
return the radio to the Call Menu.
Allows connection to the alarm output of your chart plotter to alert you when an
arrival, off-course, etc.alarm has been activated.
1. Connect the Blue wire on the back panel wire harness
to the Alarm Output of your plotter (see the operators
manual of your plotter for connection and use details).
2. When your plotter outputs the alarm signal (the plotter
grounds the alarm output), your CobraMarine radio will
activate the Alarm screen and sound a loud alarm tone.
3. Pressing any key on your CobraMarine radio will silence
the alarm.
or
DISTRESS RECEIVED CALLS
Menu.
DELETE CALL LOGS
with
TEST CALL