Call Waiting - BENQ-SIEMENS E81 User Manual

of E81 en, A31nnn-Xnnnn-Xn-n-nnnn (22.08.2006, 17:39)
left page (82)
82 Settings
The setting applies to voice and video
calls.

Call waiting

(Network support dependent)
If you are registered for this service, set
call waiting.
You will hear the call waiting tone
during a call when there is another call
waiting.
Diverts
(Network support dependent)
You can specify the conditions
under which the call types should be
diverted to your mailbox or other
numbers.
Divert video calls/Voice calls
1. Select call type.
2. Select Set.
3. Enter the number to divert to. Or
Press (Options) and select
Contact
to choose a contact's
number.
Divert other call types: All
calls/Data/Fax/Messages
1. Select Set.
2. Enter the number to divert to. Or
Press (Options) and select
Contact
to choose a contact's
number.
Note that the divert is stored in the
network and not in the phone (e.g., when
the SIM card is changed).
All calls
All calls are diverted (
when activated).
Unanswered
A call is diverted in the following
Not reachable,
situations:
Not reachable
A call is diverted if the phone is switched
off or is out of range.
No reply
A call is only diverted after a delay that is
determined by the network.
Busy
A call is diverted if another call is in
progress.
Fax
Fax calls are diverted to a number with a
fax connection.
Data/Messages
Data calls are diverted to a number with
a PC connection.
Any key answer
Incoming calls can be accepted by
pressing any key (except for
Auto redial
If a call you make is not answered, the
phone will automatically redial that call.
is displayed
No reply, Busy.
).