BENQ-SIEMENS E81 User Manual page 14

1.8 inches display
Hide thumbs Also See for E81:
Table of Contents

Advertisement

of E81 en, A31nnn-Xnnnn-Xn-n-nnnn (22.08.2006, 17:39)
left page (14)
14
Getting started
Charging the battery
The battery is not fully charged when
first unpacked.
1. Plug the charger connector into the
connection socket on the bottom
edge of your phone. Note that the
connector is inserted with its metal
contacts facing up.
2. Plug the charger into a power outlet
and charge for at least 2 hours (the
battery is 90% charged in 2 hours).
3. Once the phone is fully charged,
remove the charger from both the
power outlet and the phone.
• Do not remove the battery while
charging.
• When the battery is discharged, the
charging may not start immediately
when you plug in the connector. Wait
10 to 15 minutes for the phone to begin
charging.
• Charging is only possible within a
temperature range of 0 °C (+32 °F) to
+50 °C (+122 °F).
When the battery is low, you will be
warned with an alert sound.
Switching phone on/off
Switching phone on
Press and hold
phone on. The phone will display a
greeting message (page 78).
Entering PIN
Enter your PIN using number keys and
confirm with
.
When the PIN code entered has been
accepted, the phone will automatically
search for the designated network. This
search process may take a few seconds.
• The SIM card can be protected with a 4
to 8-digit PIN.
• If you enter the PIN incorrectly three
times in a row, the SIM card will be
locked. You must now enter the PUK
(Personal Unblocking Key) for that SIM
card in order to unlock it. Please contact
your service provider to obtain a PUK.
• To activate/deactivate /change PIN, see
page 19.
Standby mode
The phone is in standby mode and is
ready for use when the name of the
service provider is displayed on the
standby screen.
Press
to return to standby mode
from any situation.
to switch the

Advertisement

Table of Contents
loading

Table of Contents