Inserting/Removing The Battery - Panasonic Lumix DC-G9 Operating Instructions For Advanced Features

2. Getting Started/Basic Operations

Inserting/Removing the Battery

• Check that this unit is turned off.
1
1: Slide the release lever in the direction of
the arrow (to the OPEN side).
2: Open the battery door.
• Always use genuine Panasonic batteries.
• If you use other batteries, we cannot
guarantee the quality of this product.
2
Being careful about the battery orientation,
insert all the way until you hear a locking
sound and then check that it is locked by
lever A.
When removing the battery, push the lever A
toward the arrow and pull out the battery.
3
1: Close the battery door.
2: Slide the release lever in the direction of
the arrow.
• Confirm that there is no foreign matter adhered on the inner side (rubber seal) of the battery
door.
• Remove the battery after use.
(The battery will be exhausted if left for a long period of time after being charged.)
• The battery becomes warm after using it and during and after charging. The camera
also becomes warm during use. This is not a malfunction.
• Turn the camera off and wait for the "LUMIX" display on the monitor to clear before removing
the battery.
(Otherwise, this unit may no longer operate normally and the card itself may be damaged or
the recorded pictures may be lost.)
• Be careful when removing the battery as the battery will jump out.
23