Panasonic Lumix DC-G9 Operating Instructions For Advanced Features page 102

4. Focus, Brightness (Exposure) and Colour tone Settings
Optimising the focus for the touched position ([AF])
∫
1
Touch the subject.
, etc.
2
(When [ ]/[
(When [ ] is set) Touch the [End].
• (When [ ]/[
Optimising the focus and brightness for a touched position ([AF+AE])
∫
1
Touch the subject you want to optimise the
brightness for.
• The brightness optimisation position is displayed on the
centre of the AF area. The position follows the movement
of the AF area.
• [Metering Mode] is set to [
for the Touch AE.
• To return the brightness optimisation position and the AF
area to the centre, touch [Reset].
2
Touch [Set].
• The AF area with the same function as [Ø] is displayed on the touched position.
• To cancel the focus and brightness set with [AF+AE], touch [
selected).
• When recording with the Touch Shutter, the focus and brightness are optimised for the
touched position before recording takes place.
Specify the person or eye to be brought into focus when you have
selected a person indicated with an AF area.
If you have selected any location where a person or eye is not
located, move the AF area that operates in the same way as [Ø] to
the selected location to display the size and position setting screen.
The touched subject is locked.
The AF area moves to the subject and the size and position setting
screen is displayed.
The AF area moves to the subject and the appropriate setting
screen is displayed.
The AF area moves to the subject and the size and position setting
screen is displayed.
The AF area moves to the subject and the setup screen for the
enlarged area is displayed.
]/[ ], etc./[ ] is set) Touch [Set].
]/[ ] is set) The AF area setting is cleared if you touch [
], which is used exclusively
AE
102
].
] ([ ] when [Ø] is