Connecting The Camera And A Smart Device - Nikon COOLPIX W100 Reference Manual

Connecting the Camera and a Smart Device

Use a sufficiently charged battery so that the camera does not turn off during the
procedure.
Insert a memory card with sufficient free space into the camera.
1
Camera: In the camera settings
menu M Network menu
(A112), press flexible button 3
(V Connect to smart device).
The dialog in step 2 is displayed when
you turn on the camera for the first
time. This step is unnecessary in such
cases.
2
Camera: Press flexible button 3
(O) when the dialog on the
right is displayed.
A dialog prompting you whether to use
the NFC function is displayed. If you will
use the NFC function, touch the NFC
antenna of the smart device to Y (N-
mark) on the camera. When Start
pairing? is displayed on the smart
device, tap OK and proceed to step 6. If
you will not use the NFC function, press
flexible button 3 (O).
3
Camera: Confirm that the
dialog on the right is displayed.
Prepare the smart device and proceed
to the next step.
Connecting to a Smart Device (SnapBridge)
Connecting the Camera and a Smart Device
27
Network menu
Airplane mode
Connect to smart device
Send while shooting
Use SnapBridge to send photos
to your smart device and
share them online.
To skip this screen and
set SnapBridge later from
the Network menu, press X.
NFC enabled devices: touch
the camera to the smart device.
Non-NFC enabled devices: press OK.
App
SnapBridge
Camera
On your smart device, go to the app
store and search for
SnapBridge. After installing,
open the SnapBridge app.