Removing Jammed Documents - Fujitsu FI-718PR Operator's Manual

Imprinter
Hide thumbs Also See for FI-718PR:
Table of Contents

Advertisement

3.5. Removing Jammed Documents

When a paper jam occurs, remove the document in the
following procedure.
ATTENTION
Do not use force to pull out the jammed document.
1.
Remove all documents from the ADF paper chute
(feeder).
2.
Place your hand on the right side of the print
section to open it, as shown below.
ATTENTION
Make sure to open the print section before opening the ADF.
3.
Open the ADF.
ADF
Print section
4.
Remove the jammed document.
5.
Close the ADF.
ADF
Print section
12 |
6.
Close the print section.
ATTENTION
Confirm that the ADF is closed before closing the print
section.
Be careful not to have your fingers caught.
Do not move the imprinter or scanner while printing.
When you are not using the imprinter for a long time, it is
recommended to remove the print cartridge.
Ink will be consumed even when printing is not performed,
such as when the scanner is turned on.
To prevent damage, do not transport the imprinter when the
scanner is installed.

Advertisement

Table of Contents
loading

Table of Contents