Deployment Planning; Unpacking And Checking; Attachment To Ethernet - Siemens SCALANCE S612 Commissioning And Hardware Installation Manual

Deployment planning

4.1

Unpacking and checking

Unpacking, checking
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
4.2

Attachment to Ethernet

Possible attachments
Each SCALANCE S device has a certain number of ports to which the network nodes can be
connected. Depending on the interface, the network nodes are handled differently.
SCALANCE S device
SCALANCE S602 / S612
SCALANCE S623
SCALANCE S627-2M
SCALANCE S
Commissioning and Hardware Installation Manual, 05/2016, C79000-G8976-C266-06
WARNING
Do not use any parts that show evidence of damage.
Interface
External
Internal
External
Internal
DMZ
External
Internal
DMZ
Ports of the interface Port type
P1 Built-in RJ-45 jack (copper)
P2 Built-in RJ-45 jack (copper)
P1 Built-in RJ-45 jack (copper)
P2 Built-in RJ-45 jack (copper)
P3 Built-in RJ-45 jack (copper)
P1 Built-in RJ-45 jack (copper)
P4 Media module port (copper/FOC)
P5 Media module port (copper/FOC)
P2 Built-in RJ-45 jack (copper)
P6 Media module port (copper/FOC)
P7 Media module port (copper/FOC)
P3 Built-in RJ-45 jack (copper)
4
23