Changing System Settings
Menu Bar
1 Apply Settings to the Printer
Applies the settings to the printer.
Performs the same operation as when Apply is clicked.
2 Save Settings in Command File
Saves the specified settings in a command file.
Performs the same operation as when Save in Command File is selected from the Apply drop-down list.
3 Import
Imports the exported file.
4 Export
Saves the current settings in a file.
5 Save Print Log in File
Saves the print log in a file in the CSV format.
6 Print Unit Settings
Prints a report containing firmware version and device setting information.
You can also print this report using the
Confirming System Settings on page 104 for more information.
Note
When you print this report, use 0.94" (24 mm) or 1.4" (36 mm) tape.
7 Factory Reset
Resets all printer settings to factory settings.
1
2
3
4
(Feed and Cut) Button for more than 10 seconds. See
5
6
7
8
9
10
11
6
6
96