Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Place the display panel on a flat and clean surface.
2
Connect the display cable to the connector at the back of the display panel and
close the latch to secure the cable.
3
Adhere the tape that secures the display cable to the back of the display panel.
4
Place the display panel on the display back-cover and antenna assembly.
5
Align the screw holes on the display panel with the screw holes on the display
back-cover and antenna assembly.
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
Before
111