Tuner Operation; Manual Tuning - Jensen JWM40 Installation And Owner's Manual

TUNER OPERATION

Select a Band
Press AM button (7) repeatedly to select the band (AM1, AM2)
1.
2. Press FM button (8) repeatedly to select the band (FM1, FM2 and FM3) Manual
Tuning

Manual Tuning

Press the >>| or |<< buttons (5, 2) to seek stations up/down step by step.
Auto Seek Tuning
Press and hold the >>| or |<< buttons (5, 2) to automatically seek the next or previous
strong station.
Preset Stations
Six numbered preset buttons store and recall stations for each AM and FM band.
Store a Station
Select a band (if needed). Press a 1-6 preset button to select the corresponding
stored station.
Automatically Store / Preset Scan (AS/PS)
Automatically Store
Select an AM or FM band. Press and hold the AS/PS button (6) for more than 3
seconds and the unit will automatically scan for and store 12 or 18 strongest station
for all bands. To stop this function before the automatic storing is complete, press
AS/PS again.
Preset Scan
Select a band. Press AS/PS button to scan stations stored in the current band. The
unit will pause for 10 seconds at each preset station. Press AS/PS again to stop
scanning when the desired station is reached.
8
JWM40