Key Management; Save All Secure Boot Variables - Supermicro X11DPFR-S(N) User Manual

Attempt Secure Boot
If this item is set to Enabled, Secure Boot will be activated when a Platform Key (PK) is
entered. A Platform Key is a security key used to manage the security settings of the platform
firmware used in your system. The options are Enabled and Disabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.

Key Management


Provision Factory Default Keys
Select Enabled to install all manufacturer default keys for the following system security
settings. The options are Enabled and Disabled.
Install Factor Default Keys

Select Yes to install all manufacturer defaults for the following system security settings. The
options are Yes and No.
Enroll EFI Image

Select this item and press <Enter> to select an EFI (Extensible Firmware Interface) image
for the system to operate in Secure Boot mode.

Save All Secure Boot Variables


This feature allows the user to set and save the secure boot key variables specified by the
user.
Secure Boot Variables
Secure Boot Variable/Size/Key#/Key Sources
Platform Key (PK)

This feature allows the user to enter and configure a set of values to be used as a platform
firmware key for the system. This set of values also indicate the size, the keys numbers,
and the key source of the Platform Key. The options are Save to File, Set New, and Erase.
109
Chapter 4: BIOS