Select Cycle - Kenmore 110.3316 series Use & Care Manual

8.

Select cycle

Turn the cycle knob to choose your
wash cycle. For more information,
see "Cycle Guide."
Estimated Time Remaining will
light up with a cycle time. You
may notice time adjusting
during the cycle. This is normal.
If you do not want to begin a cycle immediately, you may
choose DELAY WASH option.
To choose a delay time:
1. Touch DELAY WASH button to select desired delay time.
Time will increase in hour increments up to 12 hours.
2. Press and hold the START/PAUSE/Unlock Lid button to start
delay start time.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
To cancel Delay Wash:
1. Touch POWER to cancel Delay Wash.
To pause Delay Wash:
1. Touch START/PAUSE/Unlock Lid button to pause
Delay Wash.
2. Touch START/PAUSE/Unlock Lid button again to
start Delay Wash time.
9.
Select cycle modifiers
Once you select a cycle, the default modifiers or the previous
set modifiers for that cycle will be lit. Touch the cycle settings
buttons to change the Wash Temp, Soil Level, and Spin Speed, if
desired. Not all settings are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your items. If not sure on which temperature
to use, refer to the chart below or select a cooler temperature.
Temperature suggestions
Light soils
Colors that
bleed or fade
NOTE: Even for cold wash settings, some warm water may be
added to the washer to maintain a minimum temperature.
Moderate soils Heavy Soils
Bright colors Whites
Pastels
11