Checking The Spray Arm System - Bosch SPS40C12GB Repair Instructions

Test
5.8

Checking the spray arm system

Prerequisite:
• The appliance is connected to the power supply.
• The viewing door has been mounted.
5.8.1 Checking the spray arm system for malfunctions
1. Check the fault memory for water switch faults.
2. Start the customer service test programme and wait until the water switch is
actuated.
3. Clean or replace the spray arms.
2016-03-02 / DIS 840_58300000176874_ara_en_c
.
5.8.2 Checking the installation
You should always make sure that the spray arm is installed horizontally.
1. Make sure that the position of the two suspension hooks is horizontal relative to
the bottom of the upper basket.
2. Make sure that the upper basket is mounted horizontally. This could be a
reason for the spray arms being at an angle.
Copyright by BSH Hausgeräte GmbH
If the spray arms are obstructed by tableware, explain to the
customer how to avoid this. (For correct loading, see IM)
Page 39 of 157