Replacing The Sump - Bosch SPS40C12GB Repair Instructions

Repairs
6.27

Replacing the sump

The sump is screwed centrally into the the bottom of the tub. It
extends into the basis carrier
Prerequisite:
• Appliance is disconnected from the power supply.
• Baskets have been removed.
• Tub and basis carrier have been tilted down.
• Heating pump has been removed.
• Drain pump has been removed.
• Water switch has been removed.
• AquaSensor has been removed (optional).
6.27.1 Removing the sump
Sharp edges on the sump!
Cut injuries.
► Wear protective gloves.
2016-03-02 / DIS 840_58300000176874_ara_en_c
1. Remove the four screws on the sump in the container (1).
2. Remove the sump from the underside of the washing tank (2).
6.27.2 Installing the sump
1. Brush the seal with rinse aid.
Copyright by BSH Hausgeräte GmbH Page 105 of 157