Wheel drive (wheel pilots only)
Installation stages
The Raymarine wheel drive will fit 3, 4, 5, 6, 7 or 8 spoke wheels. It is
designed to operate with steering systems with between 1 to 3.5 turns
lock to lock.
Clamp screw,
Wheel drive
M5 x 16 mm (x6)
front cover
Spoke clamp (x3)
Installing the wheel drive involves four stages:
1. Drilling the spoke clamp holes in the front cover.
2. Securing the wheel drive to the wheel.
3. Attaching the pedestal bracket.
4. Connecting the drive to the control unit.
Pre-drilled spoke
clamp holes (x2)
Clamp insert (x3)
Bracket screw,
No 10 x 3/4 inch (x4)
Pedestal
bracket
Bracket pin
Cable plug
Cable socket
Motor tube
Clutch lever
7
D5402-2