Table of Contents
Advertisement
Section 3 Electronic Control
Spin Speed
Maximum, Fast, Medium and Slow speeds are available
for each cycle. The fi nal spin speed and duration vary
from cycle to cycle.
•
Increasing spin speed will extract more water and
decrease drying time.
•
Decreasing spin speed will reduce wrinkling.
•
Select Slow spin speed to gently spin items that
should be line dried.
•
Use No Spin to omit the final spin at the end of the
cycle. The load will be very wet. Remove items from
the wash drum to drip dry or select Spin Only to
remove excess water at a more convenient time.
Soil Level
Press Soil Level to increase or decrease the wash time.
Water Level
There is no need to select a water level. The washer
automatically adjusts the water level to the type and
size of wash load.
Cycle Options
To select or delete the Extra Rinse, Extended Spin or
Signal Volume, press Options until the blinking light
indicates the desired option. Then, while it is blinking,
press Select. The indicator will light when the option has
been selected. It will no longer be illuminated when the
option has been deleted. To provide the best care for
your laundry items, not every option is available with
every cycle.
Stain Clean
Use the Stain Clean option to add a 5-minute soak in the
middle of the wash portion of any cycle except Quick
and Hand Wash.
Extra Rinse
Use this option when additional rinsing is desired to
remove excess dirt and detergent. It is recommended
for heavily soiled loads or if household members have
sensitive skin. Extra Rinse occurs before the fi nal rinse
when the liquid fabric softener is dispensed.
Extended Spin
Use this option to add several additional minutes to the
fi nal spin at the selected speed. This will improve water
extraction and decrease drying time.
Signal Volume
A signal will sound at the end of the cycle this option is
selected. The signal has an adjustable volume level or
can be turned off.
Washer Features
Delay Start
Press Delay Start to select a wash time convenient to
your schedule or during off peak energy hours. The start
of the cycle can be delayed for up to 14 hours. The delay
time selected will be displayed as 30, 60 or 90 minutes
or 2 through 14 hours.
Control Lock
To avoid having someone accidentally start or stop the
washer, press Options and Select at the same time and
hold for 10 seconds until "LOC" is displayed alternately
with the estimated cycle time. To unlock the controls,
press Options and Select at the same time and hold 10
seconds until "LOC" is no longer displayed.
Estimated Cycle Time
The estimated total cycle time will be displayed when
the cycle is selected. The time may increase if water
pressure is low, oversudsing occurs or the load becomes
unbalanced. The approximate time remaining will be
displayed during the cycle.
Status Lights
The following will be displayed at the appropriate times
during the cycle:
•
Door Lock
•
Wash
•
Rinse
•
Final Spin
Start/Pause
Press Start/pause to start, pause or restart a cycle.
"PAU" will be displayed alternately with the estimated
time remaining when the cycle is paused.
Cancel
Press Cancel to stop the cycle.
3-4
Hide quick links:
Advertisement
Table of Contents
