Miele WMV 960 WPS Operating Instructions Manual page 53

 = Low water level
 = Medium water level
 = High water level

= Intensive rhythm

= Normal rhythm
 = Sensitive rhythm

= Ultra sensitive rhythm

= Handwash rhythm

= Carried out
– = Not carried out
The washing machine has fully
electronic controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate.
The programme sequences shown in
the chart are based on the standard
programme with a full load.
The washing machine programme
sequence display shows which stage of
the programme has been reached.
Special features in the
programme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens programme.
The door can be opened at any time
during the anti-crease phase.
Programme sequence
1)
A second rinse is carried out when a
temperature of 60°C or above is
selected. A third rinse is carried out
when a temperature below 60°C is
selected.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– the spin speed has been deselected
3)
An additional rinse is carried out if:
– the Extra rinse option is selected.
4)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate down filled items.
Subsequent water intake for the main
wash is through compartment .
53