Running The First Programme - Miele WMV 960 WPS Operating Instructions Manual

TwinDos

Running the first programme

The TwinDos system needs to be
primed before you can use the
washing machine.
To do this you must run a wash
programme without laundry.
 Open the stopcock.
Make sure that the washing machine
door is closed properly.
 Touch the
Programmes
 Select the
Cottons
First the load will appear and then the
display will change to show the
standard menu for the programme.
Cottons
2:19 h
Temperature
60
°C
TwinDos
＜
 Select
TwinDos
The display will change to show the
Degree of soiling menu.
28
sensor.
programme.
Spin speed
1600
rpm
Prog. Manager
.
Degree of soiling
Light

 Use the
Heavy
selection with
If the Miele 2 Phase System is being
used:
 Confirm
whites
10:30
If using other detergents:
 Confirm the marked detergent by
touching the relevant sensor.
If using detergent and fabric
conditioner:
 Confirm with the
 Touch the flashing Start/Stop sensor.
＞
 Switch the washing machine off at
the end of the programme.
The TwinDos unit is now ready for use.
Normal
Heavy sensor to select the
setting and confirm your
OK .
by touching the
For whites
sensor.
OK sensor.
Heavy
OK
For