Brother HL-L2395DW Online User's Manual page 606

Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
Set to Default
Wired Enable
WLAN TCP/IP
Setup Wizard
Level 3 Level 4
WINS Server Primary
Secondary Specify the IP address of the secondary
DNS Server Primary
Secondary Specify the IP address of the secondary
APIPA -
IPv6 -
- -
- -
- -
- -
- -
BOOT Method
-
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server Primary
Secondary Specify the IP address of the secondary
DNS Server Primary
Secondary Specify the IP address of the secondary
APIPA -
IPv6 -
- -
Descriptions
Specify the IP address of the primary
WINS server.
WINS server.
Specify the IP address of the primary
DNS server.
DNS server.
Set the machine to allocate the IP
address from the link-local address range
automatically.
Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother Solutions Center at
support.brother.com.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC address.
Restore the wired network settings to the
factory settings.
Turn the Wired LAN interface on or off
manually.
Select the Boot method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
(up to 32 characters)
Select the WINS configuration mode.
Specify the IP address of the primary
WINS server.
WINS server.
Specify the IP address of the primary
DNS server.
DNS server.
Set the machine to allocate the IP
address from the link-local address range
automatically.
Turn the IPv6 protocol on or off. For more
detailed information, go to your model's
FAQs & Troubleshooting page on the
Brother Solutions Center at
support.brother.com.
Configure your wireless network settings
manually.
599