Securing The Camera To The Ceiling - Bosch AUTODOME IP 4000i Installation Manual

AUTODOME IP 4000i
Figure 9.2: Cut Hole in Ceiling Tile
2.
Figure 9.3: Tighten Bracket Securing Screw
3.
Figure 9.4: Secure Bracket Assembly
9.4

Securing the Camera to the Ceiling

1.
Bosch Security Systems
Tighten the four (4) securing screws to the Bracket Assembly.
Secure the Bracket Assembly to an overhead securing point with a safety wire.
Connect the cables from the ceiling to the cables on the camera. Refer to the chapter
Connection for more information.
Installing an In-ceiling Camera in a Suspended Ceiling | en
Installation Manual
21
2017.08 | 1.0 | F.01U.xxx.xxx