Haier HW70-12829 User Manual page 10

3-Control panel
3-5.3
min
min
15 min
60 min
3-6.1
3-14
3-6.2
3-7
14
15 min
+ 60 min
R
program
3-8
10
3-5.4
3.5.3-Function button
Press this button (Fig. 3-5.3) to start the programme
with a delay. End time delay could be increased in steps
of 30 minutes from 0,5-24h. For example display off
6:30 means end of programme cycle will be in 6 hours
and 30 minutes. Press
tivate the time delay. It is not applicable to programme
COTTON + and
If using liquid detergent, it is not recommended to acti-
vate the end time delay.
3.5.4-Function button
Press this button (Fig. 3-5.4) to rinse the laundry more
intense with fresh water. This is recommended for
people with sensitive skin. One or two additional rinse
cycles are available.
3.6
Press button
(Fig. 3-6.1) for 3 seconds simultaneously to block
all panel elements against activation. For unlocking
please press again the two buttons.
The display shows cLo
pressed, when the child lock is activated. The change
is not running.
3.7 Indicators
13 12
The indicators mentioned in figure 3-7 light up when
corresponding function/programme is activated.
10
9
3.8 Display
The display (Fig. 3-8) shows following information:
▶ Washing time
▶ End time delay
▶ Error codes and service information
SPIN.
Note: Liquid detergent
Child lock
„Temperature" and
(Fig. 3-6.2) if a button will be
I -
"Delay"
"Start/Pause" button to ac-
"Extra rinse"
"Spin speed"
GB