Envelope - Samsung ML-2525W series User Manual

Manual tray
The manual tray can hold special sizes and types of print material, such as
postcards, note cards, and envelopes. It is useful for single page printing on
letterhead or colored paper.
Tips on using the manual tray
• If you select Manual Feeder for Source from your software
application, you need to press
a page and load only one type, size and weight of print media at a
time in the manual tray.
• To prevent paper jams, do not add paper while printing. This also
applies to other types of print media.
• Print media should be loaded face up with the top edge going into
the manual tray first and be placed in the center of the tray.
• Always load the specified print media only to avoid paper jams and
print quality problems. (See "Print media specifications" on page 44.)
• Flatten any curl on postcards, envelopes, and labels before loading
them into the manual tray.
1. Load the paper in the manual tray.
• Do not force the paper beyond the surface with
when loading.
• When printing the special media, you must follow the
loading guideline. (See "Printing on special media" on
page 13.)
• When papers overlap when printing using manual tray,
open tray 1 and remove overlapping papers then try
printing again.
• When paper does not feed well while printing, push the
paper in manually until it starts feeding automatically.
2. Squeeze the manual tray paper guides and adjust them to the width
of the paper. Do not force them too much, or the paper will bent
resulting in a paper jam or skew.
3. To print in application, open an application and start the print menu.
4. Open Printing Preferences. (See "Opening printing preferences" on
page 17.)
5. Press the Paper tab in Printing Preferences, and select an
appropriate paper type.
For example, if you want to use a label, set the paper type to
Label.
6. Select Manual Feeder in paper source, then press OK.
7. Start printing in application.
If you are printing multiple pages, load the next sheet after the first
page prints out, and press the
for every page to be printed.
(cancel button) each time you print
mark
(cancel button). Repeat this step
Media and tray_ 13
PRINTING ON SPECIAL MEDIA
The table below shows the available special media for each tray.
When using special media, we recommend you feed one paper at a
time. Check the maximum input number of media for each tray. (See
"Print media specifications" on page 44.)
TYPES TRAY 1
Plain
Thick
Thin
Bond
Color
CardStock
Labels
Transparency

Envelope

Preprinted
Cotton
Recycled
Archive
( : Supported, Blank: Not supported)
The media types are shown in the Printing Preferences. This paper type
option allows you to set the type of paper to be loaded in the tray. This
setting appears in the list, so that you can select it. This will let you get the
best quality printout. If not, the desired print quality may not be achieved.
• Plain: Normal plain paper. Select this type if your machine is
monochrome and printing on the 60 to 90 g/m
2
• Thick: 90 to 105 g/m (24 to 28 lb) thick paper.
2
• Thin: 60 to 70 g/m (16 to 19 lb) thin paper.
2
• Bond: 105 to 120 g/m (28 to 32 lb) bond.
2
• Color: 75 to 90 g/m (20 to 24 lb) color-backgrounded paper.
2
• CardStock: 90 to 163 g/m
2
• Labels: 120 to 150 g/m (32 to 40 lb) labels.
• Transparency: 138 to 146 g/m
2
• Envelope: 75 to 90 g/m (20 to 24 lb) envelope.
2
• Preprinted: 75 to 90 g/m (20 to 24 lb) preprinted/letterhead paper.
2
• Cotton: 75 to 90 g/m (20 to 24 lb) cotton paper.
2
• Recycled: 75 to 90 g/m (20 to 24 lb) recycled paper.
When you use recycled paper as a used paper, printouts might be
wrinkled.
2
• Archive: 70 to 90 g/m (19 to 24 lb) If you need to keep the print-out for
a long period time, such as archives, select this option.
MANUAL TRAY
2
(16 to 24 lb).
(24 to 43 lb) cardstock.
2
(37 to 39 lb) transparency paper.