User Manual Contents Important information ........................2 Safety warning .......................... 2 Notes ............................3 Introduction to the product ......................4 Product appearance ......................... 4 Performance feature ........................ 4 Connecting external device ......................5 Illustration of the main menu ......................5 Main menu ..........................
User Manual Important information Safety warning To use the product safely and rightly and to keep users from suffering hurt or property loss, please observe the following safety precautions when installing, using and maintaining. Please read this handbook before operating the product and keep the handbook for future reference.
User Manual Notes Please put the facility in flat, stable and draughty place and avoid direct sunlight, high temperature, humidity, dust and corrosive gas. If the product is installed on the wall, please make sure the wall’s load bearing is enough. To avoid falling and hurt people, install according to the illustration.
User Manual Introduction to the product Thank you for buying this CCTV Display. We wish you to enjoy this product in the next few years. The power dissipation is low no matter in viewing mode or standby mode, which means you make contribution to energy saving.
User Manual Connecting external device Please connect the monitor to external devices according to the following I/O interface list, and choose corresponding signal incoming channel. Attention ● Please cut off the power of the external device and this product to make sure the connection is normal.
User Manual (7Key) (5 Key) A. “Source” button Press the button to display all the signal channel menus. B. “Upward” button Press the button to move the cursor to the needed function. Press the button to choose function OSD menu. C.
User Manual Audio menu Audio menu can set bass, treble, balance, sound mode. Press ◄► button to adjust, press ▲▼button to move, press menu button to exit. Picture menu Picture menu can set contrast, brightness, hue, saturation, sharpness, color temp, scale, overscan and picture mode.
User Manual OSD menu OSD menu can sleep timer, auto sleep, language, H-position, V-position, duration, transparency and reset defaults. Press ◄► button to adjust, press ▲▼button to move, press menu button to exit. Geometry menu Geometry menu can set H-position, V-position, clock, phase and auto adjust. Press ◄► button to adjust, press ▲▼button to move, press menu button to exit.
User Manual The way of cleaning 1. Please wipe dust and other particles with clean downless mull. 2. If it is still not clean, please smear diluent neutral cleaner free from brightener on the clean downless mull and wipe with it. Wipe dry with a dry mull after cleaning it. 3.
Page 11
User Manual Processing Method Alter to another channel or signal path. Check whether the signal line is connected. Check whether the signal line is connected. Might be disturbed by other electric appliance. Adjust fine tuning setting. Adjust luminance setting. Adjust contrast ratio setting. Adjust color setting.