Smeg CPF9IPAN Original Instructions Manual page 51

Pyrolytic cycle
Pyrolytic cleaning is an automatic,
high-temperature cleaning
procedure that causes dirt to
dissolve. Thanks to this process, it is
possible to clean the inside of the
oven very easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
Improper use
Danger of burns
• WARNING: The pyrolysis cycle
deactivates the hob.
• WARNING: If a pyrolysis cycle is
carried out when the cooking zones are
still hot, the indications on the hob
display are deactivated.
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass pane following
the usual cleaning instructions.
• Completely remove all accessories from
inside the oven.
Cleaning and maintenance
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Remove the rack/tray support frames.
• Detach removable guides, where fitted.
• Close the door.
Pyrolytic function setting
1. Select one of the cleaning functions
or with the function knob.
2. Turn the temperature knob to the right
or to the left to set the cleaning cycle
duration from a minimum of 2 hours to a
maximum of 3 hours (except for the
function whose duration is 120
minutes).
3. Press the temperature knob to start the
pyrolytic cycle.
Recommended pyrolytic cycle
duration:
• Light dirt: 2 hours.
• Medium dirt: 2 ½ hours.
• Heavy dirt: 3 hours.
119