Lenovo ThinkSystem SR860 Setup Manual page 94

Hide thumbs Also See for ThinkSystem SR860:
Table of Contents

Advertisement

Figure 71. PCIe riser card assembly
Step 2.
Align the PCIe riser card assembly with the connector on the system board; then, push it in until it
clicks in place.
Figure 72. PCIe riser card assembly installation
Step 3.
Reconnect all the cables disconnected previously.
After installing the PCIe riser card assembly, complete the following steps:
1. Reconnect the USB 3.0 cable of operator panel tray assembly vertically to the system board.
86
ThinkSystem SR860 Setup Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

7x697x70

Table of Contents