Poulan Pro PP1130ESA Owner's Manual page 25

REPAIR PARTS
HANDLES
SNOW THROWER - MODEL NUMBER PP1130ESA
KEY PART
NO. NO. DESCRIPTION
1 178875X479 Lever, Auger Control, RH
2 178648X479 Lever, Traction Drive Control, LH
3 179439 Nut, Cage 1/4-20
4 178888 Bushing, Flange
5 169675 Retainer, Hairpin
6 180402 Screw, Hex Head 1/4-20 x 3/4
7 178652 Rod, Interlock
8 184003 Tube Assembly, Interlock, RH
9 178651 Tube Assembly, Interlock, LH
10 178645X479 Panel, Control
11 74780524 Screw, Hex Head 5/16-18 x 1-1/2
12 74780528 Screw, Hex Head 5/16-18 x 1-3/4
13 178646X479 Handle Tube, LH
14 178696X479 Handle Tube, RH
15 73800500 Nut, Lock 5/16-18
16 19131316 Washer, Flat 3/8
17 178899 Knob, Handle
18 179093 Rod, Auger Control
19 179098 Rod, Traction Control
20 180428 End, Control Rod
21 73350500 Nut, Hex, Jam 5/16-18
22 72120618 Bolt, Carriage 3/8-16 x 2-1/4
23 178825X479 Handle Tube, Lower
24 180447 Sleeve, Spring
25 180926 Spring, Traction Drive
26 178669 Spring, Auger Control
27 71210616 Screw, Hex Head 3/8-16 x 1
28 180494 Clip, Panel
30 182906 Console, Panel
31 175262 Screw, Hex Head, Tapping #10-24 x 1-1/4
32 750634 Screw, Hex Head, Tapping #10-24 x 1/2
33 175339X008 Latch, Interlock
34 183518 Bolt, Shoulder
35 68038 Nut, Lock 1/4-20
36 178831 Spring, Torsion
37 178658 Spring, Interlock
38 178666 Headlight, Halogen
39 178668 Bezel, Headlight
40 180964 Harness, Headlight (Halogen)
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
25