Advertisement
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
JI5-QCA9880DB5 ". If the size of the end product is larger than 8x10cm, then the following FCC part
15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference that may
cause undesired operation.
注意 !
依據
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用 者均不得擅自
變更頻率 、 加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現 有干擾現象
時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信 ， 指依電信規定作業之無線
電信 。 低功率射頻電機 須忍受合法通信或工業 、 科學及醫療用電波輻射性電機設備之干 擾。
v
SMCD3GNV5 Administrator Manual
Advertisement
