Machining the workpiece
4.10 Editing a program
4.10.5
Opening a second program
You have the option of viewing and editing two programs simultaneously in the editor.
For instance, you can copy program blocks or machining steps of a program and paste them
into another program.
Opening several programs
You have the option of opening up to 10 program blocks.
Note
Pasting program blocks
Jobshop machining steps cannot be copied into a G code program.
Precondition
You have opened a program in the Editor.
Procedure
136
1.
In the Program Manager, select the programs that you wish to open
and view in the dual editor and then press on the "Open" softkey.
The dual editor is opened and the first two programs are displayed.
2.
Press the <NEXT WINDOW> key to change to the next opened
program.
3.
Press the "Close" softkey to close the actual program.
1.
Press the ">>" and "Open 2nd program" softkeys.
The "Select 2nd program" window opens.
2.
Select the required program that you wish to display in addition to the
program that is already open.
3.
Press the "OK" softkey.
The dual editor opens and displays both of the programs next to one
another.
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Turning