CP-X430W
6. Service points
Cautions when removing the Upper case assembly
When you remove the Upper case assembly, avoid to damage wires between speakers on the Upper case
assembly and PWB assembly Drive on the Bottom case assembly.
Wire from Speaker
Cautions when removing the PWB assembly Drive
When removing the PWB assembly Drive, there is a danger of damaging the connectors, connecting cables and
the PWB assembly Signal.
1) Disconnect 15 cables (including 3 flat cables) and remove 6 screws.
2) Lift up the PWB assembly Drive.
PWB assembly Drive
16
E806
E802
E803
P502
P602
E801
Remove these 5 screws
FRONT
PWB assembly Drive
E805
E302
E800
E811
E808
E809
P702
E807
E804
Lift up
Disconnect the 2 board-to-board
REAR
connectors.